Firewall - Flame Retardant Paint

Home - Firewall Flame Retardant Paint - Firewall (Cable)

Firewall (Cable)


Tested for Propagation of fire up to two hours by National Test House.

Even the smallest of fires from a short circuit or external source can easily cause an enormous loss to property and life. Electrical cables are a natural pathway for a fire to spread rapidly. With Fire Security cable coatings applied the possibility of a fire spreading through the cable routing is eliminated. Firewall offers spread of fire up to two hours which is more than sufficient time to get help.

Additional Product Information:

Application viscosity: Thixotropic / Ready to Use
Mix Ratio: Not applicable
Typical Film Thickness: 130 to 170 microns dry (single coat)
Required film thickness depends on fire ratings
Theoretical Coverage: 9(m2/lt) at 130 microns DFT.
Method of Application: Airless Spray, Brush, Roller.
Drying Information: Ambient Temperature (25°C)
Touch Dry: 2 Hours
Hard Dry: 4-5 Hours(Recoating Interval: Min. 5 hours)
Viscosity: 90 - 110
Approx. Weights: 1.3 ± .3kg. per ltr.
Shelf Life: 12 months from date of packing

Fire Rating Average Dry Thickness (Firewall)
30 min 250 microns
60 min 350-450 microns;
120 min 550-700 microns

In continuously improving technology there has been a swing towards the use of thin film intumescent coatings to achieve same traditional results.

- Check more details of Firewall (Wood)
- Check more details of Firewall (Cable)
- Check more details of Firewall (MS – Mild Steel)
- Check more details of Firewall (Paint Additive)
- Check more details of Firewall (Water Based)